Yamaha WH39070 - Manual (Page 208)

208
Switching a digital I/O card’s SRC on/off
LS9-16/32 Owner’s Manual
If a digital I/O card with SRC (Sampling Rate Converter) functionality (such as the MY8-AE96S)
is installed in the slot {slot 1/2}, you can use the SLOT SETUP popup window to turn the card’s
SRC on/off. In this window you can also check the operating status of the I/O card(s) installed in
the slot(s).
1
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the SYS-
TEM SETUP screen.
1 SLOT SETUP button
2
Move the cursor to the SLOT SETUP button
of the MIXER SETUP field in the lower part
of the screen, and press the [ENTER] key.
The SLOT SETUP popup window will appear, allow-
ing you to make slot-related settings. This popup win-
dow contains the following items.
1 Card type {Card type / Slot number}
This area shows the type of I/O card installed in the
slot. {On the LS9-32, this area shows the slot number
and the type of I/O card in each slot.}
B FREQ (Frequency)
This indicates the sampling frequency of the signal
being input to each channel of an MY8-AE96 or
MY8-AE96S digital I/O card, in sets of two channels.
C SRC buttons
For digital I/O cards that contain a built-in SRC (Sam-
pling Rate Converter), the SCR can be switched on/off
in groups of two channels.
D EMPHASIS
This area indicates whether emphasis processing is
applied to the input signals of a slot in which an AES/
EBU format digital I/O card is installed, in units of
two channels.
This indication is displayed as follows.
3
To turn on the SRC that is built-into the dig-
ital I/O card, move the cursor to the corre-
sponding SRC button and press the
[ENTER] key.
The SRC can be turned on/off in units of two channels.
For channels whose SRC is turned on, input/output
can occur correctly even if the input signal is not syn-
chronized with the LS9’s clock source.
4
To close the WORD CLOCK popup window,
move the cursor to the CLOSE button (or
the
× symbol in the upper right) and press
the [ENTER] key.
You will return to the SYSTEM SETUP screen.
Switching a digital I/O card’s SRC on/off
LS9-32
1
2
1
3
4
LS9-32
Item Description
----
No signal, or a signal without emphasis is being
input
ON
A valid digital audio signal is being input, and
emphasis is turned On for that signal
OFF
A valid digital audio signal is being input, and
emphasis is turned Off for that signal