Xerox 2750 User Manual
Page 7
2750 op#1 R3.doc 10-02
Page 1-5
Upper surface of
accordion folder
To accordion
folder drum
Stack diverter in
"fold" attitude
From
bridge
Upper surface of
accordion folder
Stack diverter in
"stack" attitude
From
bridge
Tilt-up
tower
cover
Model 2750 in folding mode, accepting print flow on-line from the
printer (through the bridge), or invidual prints through the optional
manual feed slot
Model 2750 in bypass mode, diverting all prints from the bridge to
the stacking surface on top of the accordion folder
A
B
Tower in normal (folding) and
bypass modes
In (A) the underside of the stack
diverter is horizontal, allowing
prints to pass beneath to the
accordion folder. In (B) the diverter
is flipped down by solenoid action.
Both the down-going (manual
feed) and up-going paths may be
accessed for jam clearance when
the tower cover is tilted up as
shown.
The handfeed
system is operative
when the push button
on the control panel is
IN and its adjacent
LED shows a steady
green. When a
document is entered
the light flashes. No
further documents
may be entered until
the flashing stops.