Xerox 2750 - Manual (Page 43)

Folder Error Messages
Message Definition Location or type of error
0010 Interlock open.
(On model 2750, location
unidentified)
A door or panel is open. If no specific item is listed
on the display, then the electronics cannot detect
the interlock, possibly due to a faulty interlock or an
open circuit in the interlock cable.
0011 Bridge lid open (2750 only)
0012 Tower door open (2750 only)
0014 Accordion lid open (2750 only)
0015 Crossfold left latch open (2750 only)
0016 Crossfold right latch open (2750 only)
0017 Rear door open (2750 only)
001F Crossfold infeed interlock (2750 only)
0020 Unexpected sheet at PS7. Bridge exit jam.
0021 Sheet arrival overdue at PS7. Bridge jam.
0022 Bad sheet width at PS1. Bridge infeed jam.
0023 Sheet arrival overdue from printer;
missing sheet detected.
(2750 only)
GFI- Trailing edge did not reach bridge input sensor
(PS0) in time.
FX- Leading edge did not reach bridge exit sensor
(PS7) in time.
Sheet may have fallen on the floor or the be stuck in
the printer.
0024 Unexpected sheet at PS1. Bridge infeed jam.
0025 Sheet arrival overdue at PS1. Bridge infeed jam.
0031 Sheet arrival overdue at PS16. Bridge exit jam.
0042 Unexpected sheet at PS8. Stack exit jam.
0043 Sheet arrival overdue at PS8. Stack exit jam.
0044 Sheet arrival overdue at PS16. Hand feed jam.
0050 Unexpected sheet at PS19. Accordion exit jam.
0051 Sheet arrival overdue at PS19. Accordion drum/exit jam.
0052 Unexpected sheet at PS16. Accordion infeed jam.