Xerox 2750 - Manual (Page 30)

2750 op#3 R3.doc 10-02 Page 3-1
Chapter 3
OUTLINE OF FOLDING MECHANISM
Section 1: The Accordion Folder
Incoming
document
In-feed rollers Fold rolls Folding drum
Edge detecting sensors
In-feed and accordion folding components
Paper gates (“flippers”), and other items have been removed for clarity.
The accordion folder comprises a pair of in-feed rolls, and a folding drum that works together with two fold
rolls. A document entering the folder passes through the bridge and into the in-feed rolls, which push the
document into contact with the folding drum. Sensors located at the fold rolls detect the leading edge of
the document and this information is used to control the folding drum in the first phase of the folding
program.
1
[1] Initial phase of the folding program
The incoming document is pushed forward by the in-
feed document and is captured by the lower fold roll.