Xerox 2750 - Manual (Page 29)

2750 op#2 R3.doc 10-02 Page 2-16
SYSTEM ERROR
The operator’s display indicates which type of system error has occurred. If calling for service, note for
the technician the four-digit error code. If the error code is no longer shown on the keypad, use the recent
error list under the system menu. SYSTEM MENU → MORE → RECENT ERRORS
But first … repeat the jam clearing procedure, checking for objects that may be causing any of the paper
sensors in the folder to be in the “on” condition (meaning that some fragment of a document may still be
present). Close all covers. Powering the machine off and on does not clear a fault condition. Note that the
display maintains a log of the previous 21 error conditions.