Xilinx SP605 User Manual
Page 56
56
SP605 Hardware User Guide
UG526 (v1.8) September 24, 2012
Chapter 1: SP605 Evaluation Board
however, users are cautioned not to also connect a PC ATX type 4-pin power connector to
J27. See the caution notes below and in
Caution!
Caution! DO NOT plug a PC ATX power supply 6-pin connector into SP605
connector J18.The ATX 6-pin connector has a different pinout than SP605 J18, and connecting
the ATX 6-pin connector will damage the SP605 and void the board warranty.
Caution!
DO NOT apply power to 6-pin Mini-Fit type connector J18 and 4-pin ATX disk drive
type connector J27 at the same time as this will damage the SP605 board. Refer to
for details. The SP605 Power can be turned on or off through the board mounted slide
switch SW2. When the switch is in the on position, a green LED (DS14) is illuminated.