Xerox XES 8855 - Manual (Page 39)

33
CARE
Cleaning the Upper Corotron
Periodic cleaning of the
corotron will reduce print
quality problems caused by
accumulation of toner inside
the printer.
CAUTION
Use care when removing and
replacing the corotron to avoid
scratching the photosensitive
drum inside the printer. Do not
force the corotron in or out of
the printer.
1. Switch off the power to the
printer.
2. Open the right side cover.
3. Locate instruction label (1)
and follow the instructions
to remove and replace the
upper corotron: (1).
5. Lay the corotron on a flat
surface to expose the
corotron wires for
cleaning.
6. Clean the corotron wires
using a lint-free cloth
dampened with water.
7. Rub the wires gently from
end to end until most of
the toner is removed.
8. Turn the corotron over and
clean the wire(s) on the
other side.
9. Allow the corotron to dry
before replacing.