Xerox XES 8855 - Manual (Page 10)

4
SAFETY NOTES (continued)
GROUND FAULT PROTECTION
The XES 8855 Engineering Printer is equipped with an
additional safety feature, a Ground Fault Interrupter (GFI). This
safety device will remove all power to the printer if an electrical
fault is detected.
In the event that power is interrupted to the printer, locate the
GFI safety device on the power cord:
Check that a red indicator appears in the window (A) of the
safety device shown opposite.
If no indicator is present, press and release the black RESET
button (B). The red indicator should appear in the window, and
power should be restored to the printer.
if the device interrupts power to the printer again, or if power is
not restored by performing the above procedure, call Xerox
Service to correct the problem.
A
B