Xerox XES 8855 - Manual (Page 37)

31
CARE
Replacing the Toner Waste Container
This printer does not have a
mechanism for detecting a full
toner waste container. The
printer is designed to operate
correctly if the toner waste
container is replaced after two
toner cartridges have been
used up.
The toner waste container
should be replaced at the
same time that the first of the
two toner cartridges, which are
packed in each container, is
installed.
Remove the second toner
cartridge from the container
and store it in a cool, dry place
until it is required.
1. Open the right side cover. 2. Move the retainer upward
and out of the way.
3. Gently move the top of the
waste container outward
and remove the container
from the printer. Take care
to avoid spilling any of the
contents.
4. Install a new waste
container in the printer.
Align the container
opening with the waste
toner tube in the printer.
5. Lower the retainer to
secure the waste
container.
6. Close the right side cover.
7. Dispose of the waste
container properly. Seal
the opening of the
container with tape or put
the container in a plastic
bag before discarding.