Xerox XES 8855 - Manual (Page 28)

22
CLEARING THE MEDIA PATH
Media Jam J-03
When a jam J-03 occurs, the
media jams while feeding from
Roll 3 in the bottom drawer.
5. Insert the lead edge of the
paper between the upper
and lower feed rollers.
6. Rotate the lower feed roller
by hand until the lead edge
is visible in the center of
the viewing hole.
7. Push the drawer in until it
is closed and latched.
1. Pull the handle and open
the bottom drawer.
2. Manually rewind the roll
until the lead edge of the
paper comes out of the
feed rollers.
3. Trim the lead edge of the
roll squarely to remove any
torn or wrinkled paper.
4. Remove any scraps or torn
pieces of paper from the
inside of the printer.