Xerox XES 8855 - Manual (Page 31)

25
CLEARING THE MEDIA PATH
Media Jam J-11
7. Roll 3 only: Rotate the
lower feed roller until the
lead edge is visible in the
center of the viewing hole.
8. Push the drawers and
Manual Bypass Shelf into
the closed and latched
position.
6. Insert the lead edge of the
paper between the upper
and lower feed rollers and
feed an inch of paper
between the feed rollers.
1. Open the Manual Bypass
Shelf and all three drawers
in order to locate the jam.
2. Rewind the jammed roll
until the lead edge of the
paper comes out of the
feed rollers.
4. If you are unable to rewind
the jammed roll easily,
gently loosen the jam
through the opening at the
rear of the Manual Bypass
Shelf.
5. Remove any scraps or torn
pieces of paper from the
inside of the printer.
6. Trim the lead edge of the
roll squarely to remove any
torn or wrinkled paper.