Problem solving, Error codes – Xerox XES 8855 User Manual

Page 25

PROBLEM SOLVING

Error Codes

Code

Cause/What to Do

H-01

The Toner Waste Container is not installed correctly.
Go to Replacing the Toner Waste Container in this
manual.

J-01

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-02

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-03

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-04

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-05

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-11

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-12

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-13

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

J-14

There is a media jam in the printer.
Go to Clearing the Media Path in this manual.

Code

Cause/What to Do

L-01

The printer senses a low toner condition.
Go to Replacing the Toner Cartridge in this manual.

P-01

Roll 1 is out of media or is loaded incorrectly in the
Top Drawer.
Go to Loading the Media in this manual.

P-02

Roll 2 is out of media or is loaded incorrectly in the
Middle Drawer.
Go to Loading the Media in this manual.

P-03

Roll 3 is out of media or is loaded incorrectly in the
Bottom Drawer.
Go to Loading the Media in this manual.

P-04

Roll 4 is out of media or is loaded incorrectly in the
Bottom Drawer.
Go to Loading the Media in this manual.

P-05

Media is not loaded or is incorrectly loaded at the
Manual Bypass Shelf.
Go to Manual Bypass Feed in this manual.

(continued)