Weider club 4870 WESY3906.0 User Manual
Page 16

16
27. Wrap the Butterfly Cable (73) around a Pulley
(43). Attach the Pulley, a Cable Trap (48), an M10
Washer (108), and two Guards (45) to the Right
Butterfly Arm (23) with an M10 x 50mm Bolt (105)
and an M10 Nylon Locknut (84).
Make sure that
the Cable Trap is oriented to hold the Cable in
the groove of the Pulley.
28. Wrap the Butterfly Cable (73) under a “V”-pulley
(44). Attach the “V”-pulley, a Long Cable Trap
(83), an M10 Washer (108), and two Guards (45)
to the Right Upright (7) with an M10 x 150mm
Bolt (94) and an M10 Nylon Locknut (84).
Make
sure that the Cable Trap is oriented to hold
the Cable in the groove of the “V”-pulley.
27
28
84
45
45
7
94
73
83
44
84
45
45
23
73
43
105
48
108
29. Wrap the Butterfly Cable (73) over a Pulley (43).
Attach the Pulley to the Right Top Frame (3) with
an M10 x 40mm Bolt (104) and an M10 Nylon
Locknut (84).
30. Wrap the Butterfly Cable (73) under a Pulley (43).
Attach the Pulley, a Cable Trap (48), and two Half
Guards (46) at the second hole from the top of
the two Pulley Plates (49) with an M10 x 50mm
Bolt (105) and an M10 Nylon Locknut (84).
Make
sure that the Cable Trap is oriented to hold
the Cable in the groove of the Pulley. Make
sure the Half Guards are oriented as shown.
29
84
3
43
104
73
105
46
46
84
43
48
49
49
73
30
108