Welch Allyn SCANTEAM 3400PDF - Manual (Page 47)

3–7 SCANTEAM 3400PDF User’s Guide
Keyboard Style Modifiers
This programming selection allows you to program special keyboardfeatures,
such as CTRL+ codes and Turbo Mode.
Control + ASCII Mode On - If you scan this selection, the scanner sends key
combinations for ASCII control characters for values 00-1F. Refer to page 6-1
for CTRL+ Values. Default = Off
Turbo Mode - Selecting Turbo Mode On, (for the IBM AT only), programs the
scanner to sendcharacters to the terminal faster. Default = Off
Numeric Keypad Mode - Selecting Numeric Keypad Mode On sends numeric
characters as if enteredfrom a numeric keypad. Default = Off
Default All - This sets all Keyboard Style Modifiers to their default states
(Control + ASCII Mode Off, Turbo Mode Off, Numeric Keypad Mode Off).
Automatic Direct Connect - When Emulate External Keyboardhas been
selected(page 3-6), Automatic Direct Connect Mode keeps the integrated
keyboard from becoming permanently disabled. Default = Off
Keyboard Style Modifiers
Default All
Control + ASCII Mode On ✱ Control + ASCII Mode Off
Turbo Mode On
Numeric KeypadMode On ✱ Numeric KeypadMode Off
✱ Turbo Mode Off
Automatic Direct Connect
Mode On
✱ Automatic Direct Connect
Mode Off
Note: This selection disabled the keyboard for the entire duration of the bar
code transmission.