Welch Allyn SCANTEAM 3400PDF - Manual (Page 29)

2–9 SCANTEAM 3400PDF User’s Guide
Interfunction Delay (x5mS) ] Intermessage Delay (x5mS) ]
Output Delays Selection
] A twoĆdigit number is required after scanning this programming bar code.
Please scan your selection on the Programming Chart on page 2-7.
Intercharacter Delay (x5mS) ]
This selection provides control of the time delays between data output by the
scanner to the host terminal. The actual delay is 5 milliseconds multiplied by
the programmed value (00 - 99). Default = 00.
Example: You need a 45 millisecond delay. Scan the Intercharacter Delay
bar code. Then scan 0" and 9" on the Programming Chart (09 x 5ms = 45 ms).
Intercharacter Delay is the time delay between data characters output by the
scanner to the host terminal.
Interfunction Delay is the time delay between function (key) codes output by
the scanner to the host terminal.
Intermessage Delay is the time delay between data messages or records
output by the scanner to the host terminal.