Welch Allyn SCANTEAM 3400PDF - Manual (Page 31)

2–11 SCANTEAM 3400PDF User’s Guide
Enable ✱ Disable
Enable ✱ Disable
AIM I.D. Transmit Selection
✱ Enable Disable
Function Code Transmit Selection
Code I.D. Transmit Selection
This selection allows you to enable or disable transmission ofa Code I.D. before
the decoded bar code symbology. (See the Symbology Chart on page 2-6
for the single character code that identifies each symbology.)
When this selection is enabled, and function codes are contained within the
scanned data, the scanner transmits the key code (which corresponds to the
decoded ASCII function code) to the terminal. ASCII function codes are
represented by the HEX values 00-1F. (Charts ofthese function codes are
shown in Section 6, Supported Interface Keys.)
This selection allows you to enable or disable transmission ofan AIM I.D. before
the decoded bar code symbology. (See AIM Guidelines on Symbology
Identifiers for more information on the AIM symbology ID characters.) Default
= Disable.
Enable ✱ Disable
Scan Voting Selection
When Scan Voting is enabled, the scanner requires three (3) identical,
consecutive scans before the bar code data will be accepted and transmitted
to the terminal. When this selection is disabled, the bar code data will be
transmitted following one (1) valid scan.