Step 8 operating the controller, Summary of key functions, Startup – Watlow MINICHEF 2000 Griddle Applications User Manual
Page 7: Preheat, Idle, 100f, Ready, Pre-`] [`heat
6
■
Wa t l o w M
I N I
C
H E F
2 0 0 0
A p p l i c a t i o n 2 0
Step 8 Operating the Controller
Summary of Key Functions
Key Function
A
Menu 1
B
Menu 2
C
Menu 3
D
Menu 4
E
Menu 5
F Menu
6
Startup
Apply power to the griddle.
[`iDle] will appear on the display.
If the Real-time Clock option is installed and [SetUp] / [CLoc`] = [``YES] the pre-
sent time of day will appear on the display.
Preheat
If the [Ready] parameter under the [SetUp] function in the Configuration mode is set
to [``yes], the controller will detect temperatures and preheat to operating tempera-
ture (above set point minus the ready band).
•
Press the key for the menu you want to run. Each key selects a different menu. You
can select from up to six menus that control temperature and cooking time. Only
one menu may be run at a time.
Note: The controller will not respond if you select an invalid menu (one for which Time 1 is set to 0).
The menu you have chosen becomes the current menu for controller operation. Until
the menu is completed or canceled, the indicator light above the menu key will light
up (flashing or steady) to indicate the active menu.
•
If the griddle is not at operating temperature, it will preheat. Meanwhile:
The word [Pre-`] [`Heat] will appear on the display for a few moments.
The menu key indicator light will flash slowly.
The temperature of Channel 1 will be displayed until the operating temperature for
both channels is reached.
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]