Wayne-Dalton 8800 User Manual
Page 9
9
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
Tools Needed:
iNST
alla
Tio
N
4
installing Fully adjustable Jamb
brackets
1ST SET
3RD SET
FULLY ADjUSTABLE
jAMB BRACKET
jAMB BRACKET
SLOT
(1) 1/4”- 20 x 5/8”
CARRIAGE BOLT
(1) 1/4”- 20
FLANGE
hEx NUT
jAMB BRACKET
VERTICAL
TRACK
qUICK INSTALL
FEATURE
qUICK INSTALL
FEATURE
VERTICAL
TRACK
None
NoTe: If you have riveted track, skip this step.
If wall angle/vertical track assembly was
supplied, skip this step and continue with step
5.
To attach the bottom jamb bracket, jB-2, locate
the first set of quick install features of the
vertical track. Align the slot in the jamb bracket
with the slot above the quick install features in
the vertical track. The long side of the bracket
is placed against the track.
Fasten the jamb bracket finger tight, using (1)
1/4”- 20 x 5/8” carriage bolt and (1) 1/4”- 20
flange hex nut.
To attach the top jamb bracket, jB-3, locate the
third set of quick install features of the vertical
track. Align the slot in the jamb bracket with
the slot above the quick install features in the
vertical track. The long side of the bracket is
placed against the track.
Fasten the jamb bracket finger tight, using (1)
1/4”- 20 x 5/8” carriage bolt and (1) 1/4”- 20
flange hex nut.
3
attaching wall angle to vertical
Track and installing wall angle
None
NoTe: If you have riveted track, skip this step.
If your door has fully adjustable flagangle to
vertical track, skip this step and go to step 2.
hand tighten the wall angle to the vertical
track using 1/4”- 20 x 5/8” carriage bolts and
1/4”- 20 flange hex nuts.
1/4”- 20 x 5/8”
CARRIAGE BOLTS
1/4”- 20 FLANGE
hEx NUTS
WALL ANGLE
VERTICAL
TRACK