Visioneer STROBE 500 - Manual (Page 33)

26 V ISIONEER S TROBE 500 S CANNER U SER ’ S G UIDE
Loading Documents to
Scan
This section illustrates scanning with the buttons on the scanner. After
loading documents in the scanner, as described below, you can also scan
using the OneTouch Button Panel on screen, or using a scanning
application.
Note: Always remove any staples or paper clips from documents
before inserting them into the scanner’s Automatic Document
Feeder. Staples and paper clips can jam the feed mechanism and
scratch the internal components. Also remove any labels, stickers,
or Post-It™ notes that may come off during the scanning process
and get stuck in the scanner. Misuse as described here will void your
scanner’s warranty.: