Visioneer STROBE 500 - Manual (Page 103)

96 V ISIONEER S TROBE 500 S CANNER U SER ’ S G UIDE
4. Wipe clean all of the rollers in the scanner. Be careful not to snag the
cloth on the paper sensor.
5. Close the cover when you’re finished.
C
LEANING THE
D
OCKING
S
TATION
Cleaning the Input Tray:
1. Wet a soft cloth with some isopropyl rubbing alcohol (95%).
2. Wipe down the input tray with the cloth.
Paper Sensor
Rollers (located in
both the body of the
scanner and under the
scanner lid).