Visioneer STROBE 500 User Manual
Page 22
S
TEP
2: I
NSTALL
THE
S
OFTWARE
AND
C
ONNECT
THE
S
CANNER
15
To Connect the Scanner Power to the Computer:
1.
Plug the round end of the USB power cord into the power jack on the
scanner.
2.
Plug the flat end of the USB power cord into an available USB port on
the back of the computer.
We do not recommend using a USB hub to power the scanner.
Note: Only use the USB power cable included with your scanner
(DA-24C24 Made by ADP). Connecting any other type of USB
power cable may damage your scanner, and will void its warranty. If
you do not have your USB power cable, you can order a new one by
contacting our Customer Service department. Please refer to the
Technical Support Card, included with your scanner, for our
company contact information, or visit the Parts & Accessories page
for your scanner at www.visioneer.com.