Visioneer STROBE 500 - Manual (Page 13)

6 V ISIONEER S TROBE 500 S CANNER U SER ’ S G UIDE
■ If your computer is running Windows version Vista or later, you may see
the Windows User Account Control screen asking you to confirm
system changes. Click the Continue button to allow the installation to
proceed.
S
TEP
1: U
NPACK AND
A
SSEMBLE THE
S
CANNER
1. Remove the scanner from its protective foam and plastic bag.
2. Remove the tape and protective foam strips from the scanner body and
input tray.
3. Lift the paper guide up from the scanner body. Push the tray back until
it clicks in place.
If the tray isn’t fully seated in position, paper feeding from the input
tray may jam in the scanner.
4. Pull the scanner cover release to open the scanner. Remove the foam
strip from the inside of the scanner. Close the cover when you are
done.