VIEWSONIC PJ751 - Manual (Page 26)

ViewSonic PJ751 23
OSD MENU FUNCTION DESCRIPTION
This projector has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN, and
OPTION. Each of these menus is operated using the same methods. The basic operations of these
menus are:
Main Menu
With the MAIN menu, the seven items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the
Table.
Menu screen display: Press the "MENU" button.
Menu selection:
Choose a menu name using the / button, and press the
button or the ENTER button.
Item selection:
Choose an item using the / button, and press the
button or the ENTER button
Return menu to last previous screen:
Press the button or the ESC button.
Execution of settings and/or adjustments:
Operate by using the / button. (For
further details, read the explanation for each
separate menu.)
Initialization of settings and/or adjustments: During operation, press the RESET button.
(Note that items whose functions are performed
simultaneously with the operation of clock
phase, language selection, automatic adjust-
ment, etc., cannot be initialized.)
End menu operations: Press the MENU button, or do not perform any operation for several
seconds.
Item Description
BRIGHT
Adjust Brightness: Light Dark
CONTRAST
Adjust Contrast: Strong Weak
ASPECT Select Aspect Ratio:
At RGB Input or Hi-Vision 1125i(1035i/1080i)/7 20p of COMPONENT VIDEO Input:
4:3 16:9
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
4:3
16:9 SMALL
The SMALL picture may not be displayed correctly with certain input signals.
PICT. POSIT. Select Picture Position (for 16:9/SMALL Picture):
TOP
CENTER BOTTOM
GAMMA Select Gamma Mode:
NORMAL
CINEMA DYNAMIC
LANGUAGE Select Menu Language:
ENGLISH
FRANÇAIS DEUTSCH
ESPAÑOL ITALIANO NORSK NED-
ERLANDS JAPANESE POTUGUÊS
CHINESE KOREAN
Example: MAIN Menu
(BRIGHT)