VIEWSONIC PJ751 - Manual (Page 22)

ViewSonic PJ751 19
Using the Magnify Feature
1 Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
2 Press the POSITION button, then use the , ,
, buttons to select the area to enlarge and then
press the POSITION button again to confirm your selec-
tion.
3 Press the , buttons to zoom in and out of the selected area.
Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore
the screen to normal. (The projector will also automatically exit MAG-
NIFY mode if there is a change in the input signal's state.)
NOTE:
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO,
ASPECT or VIDEO feature is used, or if there is a change in the input signal's state.
Freezing the Screen
1 Press the FREEZE button
The icon appears and the screen will freeze at the current image. Press
the FREEZE button again and the appears as the projector exits
FREEZE MODE.
NOTE:
• The projector will automatically exit FREEZE mode if either the POSITION, VOLUME,
MUTE, AUTO, BLANK ON/OFF, or MENU ON/OFF feature is used, or if there is a change in
the input signal's state.
• If the projector continues projecting the same image for a long time (i.e. you forget to exit
FREEZE mode), the image may remain as an afterimage. Do not leave the projector in FREEZE
mode for too long.