VIEWSONIC PJ1065 - Manual (Page 7)

ViewSonic PJ1065 5
Inserting the Batteries
Insert the AA batteries into the remote control
device.
1 Remove the battery cover.
Push the knob while lifting up the cover of the
battery compartment.
2 Insert the batteries.
Insert the batteries according to their plus and
minus poles.
3 Replace the cover to the battery compartment.
CAUTION
• Be sure to only use the specified batteries with this remote control device. Do not mix new and
old batteries, since this may result in a cracking or leakage of batteries posing a risk of fire or
leading to personal injury.
• Insert the batteries into the remote control device according to the indicated plus and minus poles.
An incorrect insertion may result in a cracking or leakage of batteries posing a risk of fire or
leading to environmental pollution.
• Before disposing of the batteries, please be sure to observe the respective regulations concerning
the protection of environment in your area.
• Always be sure to keep the batteries out of reach of children or pets.
• If the remote control device will not be used for an extended period of time, remove the batteries
from its battery compartment.
NOTE: • Replace the batteries if the operation of the remote control device becomes irregular or
weak.