VIEWSONIC PJ1065 - Manual (Page 17)

ViewSonic PJ1065 15
Options Menu
The following adjustments and settings are available when OPT. is
selected on the menu. Select an item with the and buttons, and start
operation.
Table 7: Options Menu
Item Description
VOLUME Volume Adjustment: Reduce VOLUME Increase VOLUME
MENU
COLOR Select Menu Background Color: Select with the and buttons.
LANGUAGE
Operation Start/Stop: Press the button.
Select Menu Display Language: Select with the and buttons.
AUTO OFF
Operation Start/Stop: Press the button.
Set AUTO OFF: Set 1-99 minutes with the and buttons. The system
automatically enters the standby mode when a signal is not received for the set
time.
Clear AUTO OFF: Select STOP (0 min.) with the button. When STOP is
selected the system does not enter the standby mode even if no signal is
received.
SYNC ON G
Operation Start/Stop: Press the button.
SYNC ON G Valid: Select TURN ON with the button.
SYNC ON G Invalid: Select TURN OFF with the button.
• May not be displayed correctly with some input signals when SYNC ON G is
valid. In such cases, remove the signal connector so that no signal is received,
set SYNC ON G to invalid, and reconnect the signal.
WHISPER
Set / Clear WHISPER Mode: Press the button. When WHISPER is
selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise
level from the unit is reduced, and brightness level on screen is a little lower.