VIEWSONIC PJ1065 - Manual (Page 14)

12 ViewSonic PJ1065
Setup Menu
The following adjustments and settings are pos-
sible when SETUP is selected at the top of the
menu. Part of the Setup menu differs between
RGB input and video input. Select an item with
the and buttons, and start operation. Use
the Single menu to reduce menu size (see Table
3, MENU SELECT).
Table 4: Setup Menu
Item Description
RGB IN 1
RGB IN 2
DVI
VIDEO
S-VIDEO
COMPONENT
BRIGHT Adjustment: Dark Light √ √ √
CONTRAST Adjustment: Weak Strong √ √ √
V POSIT Adjustment: Down Up √ − −
H POSIT Adjustment: Left Right √ − −
H PHASE
Adjustment: Left Right
• Adjust to eliminate flicker.
√ − √
H SIZE
Adjustment: Small Large
• The image may not be displayed correctly if the
horizontal size is excessive. In such cases, press the
RESET button, and initialize the horizontal size.
√ − −
SHARPNESS Adjustment: Soft Clear
− − √
COLOR Adjustment: Light Dark − − √
TINT
Adjustment: Red Green
• Valid only when NTSC or NTSC 4.43 signal is
received.
− − √
COLOR BAL R Adjustment: Light Dark
√ √ √
COLOR BAL B Adjustment: Light Dark
√ √ √
ASPECT
Select Image Aspect Ratio:
Select position of image:
Press the button when 16:9 [ ] has been
selected.
Center
→
Down
→
Up (
→
Center )
√ √ −
Select Image Aspect Ratio:
small[ ]
Select position of image:
Press the button when 16:9 [ ] / 4:3 small [ ]
has been selected.
Center
→
Down
→
Up (
→
Center )
• 4:3 small cannot be selected with the input of 720P
or 1080i component.
• 4:3 small may not be displayed correctly with some
input signals.
− − √
RGB IN 1
RGB IN 2
DVI
VIDEO
S-VIDEO
COMPONENT VIDEO