Unified Brands VENTILATION SYSTEMS - Manual (Page 18)

15
"SAVE ENTER" to retain that time. Press
"RETURN CLOCK" to return to Normal Display.
d. Reviewing The Daily Event Schedule
The Daily Event Schedule is a program which
will automatically turn the fans on and off
and/or initiate the PAWS up to four [4] times
each day. Each day may be different from
another or it may be programmed to stay off for
the entire day. To review the Daily Event
Schedule, press "CHECK". The display will
show "CHECK MODE SELECTED" and then
indicate the first programmed event of that day.
If there are no events programmed for that day,
it will display the next programmed event. If
there are entries in the Daily Event Schedule,
press "NEXT" to see the next event and/or
press "LAST" to see the previous event. Press
"RETURN CLOCK" to return to Normal Display.
If no key is pressed for thirty [30] seconds the
display will automatically change to Normal
Display.
e. Changing The Daily Event Schedule
In order to make initial entires in the Daily
Event Schedule or change existing entries,
press "PROGRAM DAY". The display will
show "PROGRAM MODE SELECTED" then
ask which day's events are to be changed.
Press "DAY+" and/or "DAY-" to select the
desired day, then press "SAVE ENTER". If no
events are programmed to occur that day, the
display will indicate "FAN ON UNPROG". If
events are programmed for the day selected,
that day's first event will be displayed. If an
event other than the one being displayed is to
be entered or changed, press "NEXT" until the
correct event is displayed. Press "CHANGE
CLEAR".
NOTE: WHEN AN EVENT IS CHANGED, ALL
EVENTS WHICH ARE SCHEDULED TO OCCUR
ON THAT DAY AFTER THE EVENT BEING
CHANGED ARE ERASED.
The time will begin to flash. Press "HOUR+"
and/or "HOUR-" to select the desired hour.
Press "MINUTE+" and/or "MINUTE-" to select
the desired minute. When the correct time is
displayed, press "SAVE ENTER". Press
"NEXT" to access the next event.
NOTE: A "FAN ON" EVENT MUST BE FOLLOWED
BY A "FAN OFF" EVENT.
Repeat the programming procedure indicated
above. When you have completed
programming the events for that day, press
"RETURN CLOCK" to return to Normal Display.
If no key is pressed for thirty [30] seconds, the
display will automatically return for Normal
Display.
To program Daily Event Schedules for
additional days, particularly if they are different
from the schedule already programmed, repeat
the previous steps.
f. Repeating The Daily Event Schedule
If you wish to repeat the Daily Event Schedule
from one day to another, press "REPEAT
DAY". The display will show "REPEAT MODE
SELECTED", then ask which day's Daily Event
Schedule is to be repeated. Select the
intended day by pressing "DAY+" and/or "DAY-
". When the proper day is displayed, press
"SAVE ENTER". The display will then ask on
which day that Daily Event Schedule is to be
repeated. Press "DAY+" and/or "DAY-" until
the proper day is displayed, then press "SAVE
ENTER". The display will acknowledge that the
schedule has been copied, then return to the
starting Repeat Day display. Continue as
outlined above to repeat additional Daily Event
Schedules.
NOTE: IF A DAY HAS ALREADY BEEN
PROGRAMMED FOR A DAILY EVENT SCHEDULE,
THE ORIGINAL WILL BE ERASED AND
REPLACED BY THE REPEAT SCHEDULE.
When you are finished repeating Daily Event
Schedules, press "RETURN CLOCK" to return
to Normal Display. If no key is pressed for
thirty [30] seconds, the display will return to
Normal Display, automatically.
g. Holiday Feature
To temporarily suspend a programmed Daily
Event Schedule for a particular day during the
upcoming seven [7] day period, press
"HOLIDAY". The display will show the status of
the current day. Select the day's Daily Event
Schedule which you wish to suspend [make a
Holiday] by pressing "DAY+" and/or "DAY-".
Press "CHANGE CLEAR" to make that day a
holiday. Press "DAY+" and/or "DAY-" to select
additional Holidays press "RETURN CLOCK" to
return to Normal Display. If no key is pressed
for thirty [30] seconds, the display will
automatically return to Normal Display. After
the Holiday passes, the Daily Event Schedule
will resume normally. The Manual Controls will
operate normally during a Holiday.