Uniden ANA9620 - Manual (Page 8)

▼
Direct Wall Mounting
If you do not have a standard wall plate, you can mount your
phone directly on a wall. Before mounting your phone,
consider the following:
• Select a location away from electrical cables, pipes, or
other items behind the mounting location that
could cause a hazard when inserting screws
into the wall.
• Make sure the wall material is capable of
supporting the weight of the base.
• Use #10 screws with anchoring devices suitable
for the wall material where the base will
be placed.
1. Insert two mounting screws 3 15
16
inches apart.
Allow about 3
16
of an inch between the wall
and screw heads for mounting the phone.
2. Plug and secure the AC adapter cord by following steps 2 and
3 of the Standard Wall Plate Mounting.
3. Plug one end of the telephone line
cord into the
LINE
(s) jack on the
base. Then place the telephone
cord(s) inside the molded
channel(s) on the bottom of the
wall mount stand.
4. Place the base on the posts of
the wall screws and push down
until it is firmly seated.
5. Plug the other end of the short telephone cord into a
telephone wall jack.
6. Plug the AC adapter into a standard 120V AC wall outlet by
following step 7 of the Standard Wall Plate Mounting.
%
SETTI
N
G
U
P
C:\ana9620-1\ANA9620-1.vp
Fri Jul 31 12:35:16 1998
Color profile: Disabled
Composite Default screen