Uniden ANA9620 - Manual (Page 27)

Troubleshooting
If your ANA9620 Cordless Telephone is not performing to
your expectations, try these steps. If you are still unable to
resolve the problems, contact your PBX Administrator or the
Uniden Technical Support Department.
Note: Do not attempt to service this unit yourself. All
service must be done by qualified service personnel.
Problem Suggestion
Charge light won’t
come on when
handset is placed in
charging unit.
•
Make sure the AC adapter is plugged into
the base and wall outlet.
•
Make sure handset is properly seated in
charging unit.
• Make sure the sealed lead-acid battery is
properly placed in the handset.
• Make sure that the charging contacts on
the handset and charging unit are clean.
Conversation
interrupted
frequently.
•
Make sure that the base antenna is fully
vertical.
•
Move closer to the base.
•
Check for LOW BATT warning.
Warning tone and
NO SERVICE
message.
• Move closer to the base.
Handset doesn’t ring.
•
Sealed lead-acid battery may be weak.
Charge the battery for 5-6 hours.
• Make sure the base antenna is fully
vertical.
•
The handset may be too far away from
the base.
•
Ensure the ringer ON/OFF switch is in
the ON position.
$
TR
OU
BL
ES
HOOT
IN
G
FO
RY
OU
RP
HO
NE
C:\ana9620-1\ANA9620-1.vp
Fri Jul 31 12:36:01 1998
Color profile: Disabled
Composite Default screen