Uniden ANA9620 - Manual (Page 18)

PROGRAMMING XFER IN PBX
The
XFER
key can be programmed for special use, such as
causing a “Hook Flash” followed by a special number or
function.
The Hook Flash is used to send a signal to the PBX system to
initiate a transfer.
For example — to program the
XFER
key for “Hook Flash”
and the
9
key for outside transfers only:
Press and hold
PAUSE
for two
seconds.
The talk icon blinks
Press
FLASH/RDL
.
Press
9
.
Press
XFER
.
Press
XFER
.
For the ANA9620, the transfer key is operated by the
Hook-Flash function. Program your system transfer code with
the assistance of the PBX System Administrator.
%
PR
O
G
R
A
M
M
IN
G
PBX
Note: Before programming these commands, contact
your PBX Administrator to obtain programming codes.
C:\ana9620-1\ANA9620-1.vp
Fri Jul 31 12:35:45 1998
Color profile: Disabled
Composite Default screen