Uniden ANA9620 - Manual (Page 21)

PBX Features
▼ L1
Key
Press the
L1
key to initiate a call on Line 1.
▼ L2
Key
Press the
L2
key to initiate a call on Line 2.
▼ CONF
In PBX mode, the
CONF
key must first be programmed.
Refer to the section entitled “PROGRAMMING CONF IN PBX.”
▼ XFER
Press
XFER
(TRANSFER), you will hear a “beep.”
Dial the target number.
When the receiving party answers, press
XFER
to
complete call.
Note: This feature is only available in PBX mode.
▼ HOLD
Press once, you will hear a “beep” and the call is placed
on hold.
Press
L1, L2
or
talk
to resume the call.
▼ PAUSE
In PBX mode, the
PAUSE
key is used to program the
CONF
and
XFER
feature buttons. Refer to the sections entitled
“PROGRAMMING XFER IN PBX” and “PROGRAMMING
CONF IN PBX.”’
▼ FLASH/RDL
Press once to cause a “Hook Flash” while on a call.
In Standby mode, you can redial any one of the last three
numbers previously dialed.
C:\ana9620-1\ANA9620-1.vp
Fri Jul 31 12:35:50 1998
Color profile: Disabled
Composite Default screen