Uniden DCT5280 - Manual (Page 69)

[ 67 ] E X PA N D I N G Y O U R P H O N E
EXP
ANDING YOUR
PHONE
EXP
ANDING YOUR
PHONE
Intercom/Call Transfer Feature
Intercom and Call Transfer features are available for your phone.
• If the party is busy or out of range, you will hear a beep and the handset returns to the
standby mode.
• If any of the following occurs, the operation will be canceled.
- Press talk/flash or speaker on the handset, and (talk) on the base.
- Receive an outside/intercom call (while selecting the other handset).
• When the party does not answer within 1 minute, Intercom or Call Transfer is canceled.
Intercom
From handset to handset or to the base
1) Press intercom/hold in the standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press volume/
▲ or ▼ , then
press the OK soft key.
If you select “All”, all handsets and the base will be paged. An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press talk/flash,
intercom/hold, or the ANSWER soft key (or intercom or (talk) on the base).
Or press any number key, /tone/ t , or # /s (when Any Key Answer is On), or pick
up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press the end key or the END soft key on either
handset (or intercom on the base).
From the base to a handset
1) Press intercom on the base in the standby mode.
2) All the handsets will be paged.
3) On the receiving handset, to answer the call, press talk/flash, intercom/hold, or the
ANSWER soft key. Or press any number key, /tone/ t , or # /s (when Any Key
Answer is On), or pick up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press the end key or the END soft key on the handset
or intercom on the base.
T o i n t e r c o m
H a n d s e t # 2
H a n d s e t # 3
BACK BACK OK
DCT5280_UP302BH UP01302BA_1 5/23/03 1:57 PM Page 67