Uniden DCT5280 - Manual (Page 19)

[ 17 ]
GETTING ST
ARTED
Direct wall plate mounting
If you don’t have a standard wall plate, you can mount your base directly
to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location
that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 10 - 15 feet of a working phone jack to
avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the
base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall, (with
their appropriate anchoring device), 3-15/16
inches apart. Allow about 1/8 of an inch
between the wall and screwheads for mounting
the base.
2) Refer to steps 1 through 7 on page 16 to mount
the base.
G E T T I N G S TA R T E D
DCT5280_UP302BH UP01302BA_1 5/23/03 1:54 PM Page 17