Uniden DCT5280 - Manual (Page 24)

G E T T I N G S TA R T E D [ 22 ]
Global Setup
If you change the setting in one of the handsets, you change the settings for all
handset(s) in the Global Setup menu. Only one handset can change a setting at a time.
Submenu name Description
Day & time Set the day and time of your display (see page 29).
CIDCW Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as
regular Caller ID on call waiting number (see page 29). CW Deluxe allows you to
handle call waiting calls in seven different ways (see page 49).
Area Code Store or edit the area code. If you enter a 3-digit area code number in the
“Area Code” option, your local area code does not appear in the Caller ID message.
For calls received from outside your local area code, you will see a full 10-digit
number (see page 29).
Note: If your calling area requires 10-digit dialing, do not program this option.
Dial Mode Set the dial mode to tone or pulse (see page 30).
Submenu name Description
Language Select the Language of your answering system announcements from English,
French, or Spanish (see page 28).
Call Screen Set the call screening feature to On or Off (see page 28).
Answer Mode Set your answering system to On or Off (see page 28).
System Reset
This menu is used to clear the handset ID from the base, or the base ID from the handset.
Submenu name Description
Deregister HS Clear the handset ID from the base. Use this menu, for example when
you change the digital security code (see page 30).
Replacing Base Clear the base ID. Use this menu, for example, if you replace
the base with a different base of the DCT series model
(DCT5260/DCT5280/DCT5285) (see page 30).
DCT5280_UP302BH UP01302BA_1 5/23/03 1:55 PM Page 22