Uniden DCT5280 User Manual

Page 55

T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 53 ]

THE INTEGRA

TED

ANSWERING DEVICE

• If you press

ringer/vol

▲

in the

maximum volume level
(10) or ringer/vol

▼

in the lowest volume
level (1), you will
hear a beep.

• Press and hold

ringer/vol

▲

▼

on the base to scroll
quickly through the
volume levels.

Adjusting the speaker volume level

When the base speaker is in use, press ringer/vol

▲

▼

on the base to adjust the

volume. Press ringer/vol

▲

for louder or ringer/vol

▼

for softer.

The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.

Using the menu mode

The Menu mode allows you to set the following Answering System functions.
• To scroll through the menu options, repeatedly press

CLOCK/MENU on the base in the standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate the
standby mode.

• If you press

, the operation is canceled.

• If the system remains idle for about 5 seconds after the

announcement, the system returns to standby.
Once

/SELECT or

/SELECT is pressed, the idle

time is extended to 10 seconds.

• If there is an incoming call, the operation is canceled.
• When you have completed the setting, press

to exit

the menu mode, or CLOCK/MENU to move to the next
menu option.

• You can also set these menus from the handset. See

“Answering System Setup” on page 27 for instructions.

For your convenience, voice prompts will guide you
through the menu setup mode.

CLOCK/MENU

DCT5280_UP302BH UP01302BA_1 5/23/03 1:56 PM Page 53