Uniden DCT5280 - Manual (Page 39)

B A S I C S [ 37 ]
New Message LED
The new message LED on the handset is designed to work with your answering system.
The LED flashes when you have new messages in your answering system.
The LED stops flashing when all new messages are played back (see “Using your
Answering System” on page 58).
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting
call. There is a short pause, then you will hear the new caller.
To return to the original caller, press talk/flash again.
You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
BASICS
DCT5280_UP302BH UP01302BA_1 5/23/03 1:55 PM Page 37