Toshiba SUPER MODULAR MULTI HFC R-410A - Manual (Page 103)

103
Outdoor module - Four units connected
MMY- AP3201T8, AP3401T8, AP3601T8, AP3801T8, AP4001T8, AP4201T8, AP4401T8,
AP4601T8, AP4801T8
MMY- AP3201HT8, AP3401HT8, AP3601HT8, AP3801HT8, AP4001HT8,
AP4201HT8, AP4401HT8, AP4601HT8, AP4801HT8
Legend
1.
Anchor bolt pitch
2. (including feet)
3. 16-15 x 20 (slot)
All dimensions are given in mm.
Notes:
1.
If there is an obstacle at the top of the
outdoor unit, ensure that the top of
the outdoor unit clears the obstacle by
2000 mm.
2. Ensure that the height of obstacles
around the outdoor unit does not exced
800 mm from the bottom of the outdoor
unit.
3. Draw out the field-supplied pipe to the
front of the outdoor unit horizontally,
and keep 500 mm or more between the
outdoor unit and pipe if placing the pipe
transversely.
4. Arrange each outdoor unitin order of its
capacity
(Master unit ≥ slave unit ≥ slave unit ≥
slave unit)
Note 3
Note 4
Note 4
Note 3
Front
Front (For work and service)
Space required for service
Front Front
Note 4
Front Front Front
Front
Front Front Front Front
Front
Unit combination Outdoor unit combination
Master unit Slave unit Slave unit Slave unit
MMY-AP3201T8, HT8 MMY-MAP0801T8, HT8 MMY-MAP0801T8, HT8 MMY-MAP0801T8, HT8 MMY-MAP0801T8, HT8
MMY-AP3401T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP0801T8, HT8 MMY-MAP0801T8, HT8 MMY-MAP0801T8, HT8
MMY-AP3601T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP0801T8, HT8 MMY-MAP0801T8, HT8
MMY-AP3801T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP0801T8, HT8
MMY-AP4001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8
MMY-AP4201T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8
MMY-AP4401T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1001T8, HT8 MMY-MAP1001T8, HT8
MMY-AP4601T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1001T8, HT8
MMY-AP4801T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1201T8, HT8 MMY-MAP1201T8, HT8
Note 4