Tut Systems XL-12000S User Manual
Page 41
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
7.0 CONFIGURE THE MODEM
TUT SYSTEMS
33
Figure 7.10 Modem Management Screen
1.
Tab to the LAN IP Address field. Type the IP address of the
modem’s LAN interface.
2.
Tab to the Subnet Mask field. Type the subnet mask of the
modem’s LAN interface.
3.
Tab to the Default Gateway field. Type the IP address of the
modem’s default gateway.
4.
Entries may be made into optional fields at this time. See Table
7.2 for detailed descriptions of each field.
5.
Press
6.
After the modem reboots, you can Telnet to the modem from
the LAN interface to complete configuration. If you choose to
continue from the console port, skip the Telnet set-up section
which follows and, instead, press
Display screen. Select