Main menu display, Modem management, Figure 7.9 – Tut Systems XL-12000S User Manual
Page 40: Main menu screen, Figure 7.10 modem management screen, 3 main menu display, 4 modem management, Back to table of contents
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
32
TUT SYSTEMS
7.0 CONFIGURE THE MODEM
7.2.3.3 Main Menu Display
From the main menu press “M” to continue with modem management.
Figure 7.9 Main Menu Screen
7.2.3.4 Modem Management
This procedure describes the configuration that is required to initial-
ize your XL-12000S. The purpose is to set the modem’s IP address,
default gateway, and subnet mask. Prior to completing this proce-
dure, you will only be able to access your modem using a serial con-
sole connection. After you complete this procedure, you can access
your system using Telnet or SNMP, in addition to the console port.
Access the Modem Management screen by pressing “M” from the
Main Menu.