Tut Systems XL-12000S - Manual (Page 38)

XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
30 TUT SYSTEMS 7.0 CONFIGURE THE MODEM
Figure 7.7 Serial Session/Version ID Screen
The section continues by describing how to initially configure the
modem via the Console port.
7.2.3.2 Login Display
User Login
At the Login Display the User Login field is presented. The user
login refers to a class of user.
Note: “Craft” is the only available user login and is displayed during login.
The system login time is one minute. If this time is exceeded, before
keyboard activity begins, the session will be closed. The message
“Login time exceeded” will be displayed and you will have to press
to connect to the XL-12000S. If you were connected via a
Telnet session you will have to reconnect.
New XL-12000S modems are not password protected until you
assign a password. Instructions for changing your password will be
provided later in this manual (section 7.2.3.7). Attempting to enter a
password will generate a “Password incorrect” error message. At this
Back to Table of Contents