Tally Genicom Matrix Printer - Manual (Page 283)

➌ With the sequence CSI n g for n the following parameters are available:
n hex. dec. function
0 30 48 clear horizontal tab stop at current position
2 32 50 clear all horizontal tab stops in current line
3 33 51 clear all horizontal tab stops in all lines
Examples:
CSI g clear horizontal tab stop at current position
CSI 3;4 g clear all horizontal and vertical tab stops
(for this also see page 52, Vertical Tab Stops ON/OFF)
Later changes of character density will not influence the physical position of the tab
stops.
A horizontal tabulation is executed by the HT control code (hex.09, dec.9); for this see
page 45, Horizontal Tab Stop.
Print Positioning 47