Tally Genicom Matrix Printer User Manual
Page 116
Not all printer fonts are scaleable. Please refer to the printer’s reference manual which
fonts are supported. Scaleable fonts can only be printed in one quality (LQ).
Points:
Following point sizes (1/72 inch) are available:
8, 10 (10.5), 12, 14, 16, 18, 20 (21), 22, 24, 26, 28, 30, 32
Pitch:
Previously set pitch settings will be cancelled.
Following sequences are ignored in scaleable font mode:
ESC SI
condensed print
ESC SO
enlarged print mode (automatically reset after one line)
ESC SP
character spacing
ESC W
continuous enlarged print mode ON/OFF
ESC w
double height
SI
condensed print ON
SO
enlarged print mode (automatically reset after one line)
Following sequences will cancel the scaleable font mode:
ESC !
print mode selection
ESC @
printer initialization
ESC g
character density 15 cpi
ESC M
character density 12 cpi (Elite)
ESC P
character density 10 cpi (Pica)
ESC p
proportional spacing ON/OFF
STOP
Character Styling
33