Tally Genicom Matrix Printer - Manual (Page 181)

Single n/180 Inch or n/216 Inch Line Feed
ESC J
Single n/180 Inch or n/216 Inch Back Feed ESC j
Data Structure ASCII ESC "J" n/180 inch line feed
➊
hex. 1B 4A n/216 inch line feed
dec. 27 74
ASCII ESC "j" n/180 inch back feed
➋
hex. 1B 6A n/216 inch back feed
dec. 27 106
Description
➊
When the printer receives this code sequence it advances the paper by n ⁄
180 inches
(24 needle printer) or by n ⁄
216 inches (9 neadle printer). This sequence does not effect
a CR (reset line pointer).
➋
When the printer receives this code sequence it moves the paper backwards by
n ⁄
180 inches (24 needle printer) or by n ⁄
216 inches (9 needle printer).
Unlike an ordinary line feed code, code ESC J does not advance the paper to the top of
the next page when the print position enters the perforation area (Perforation-skip operati-
on is not performed). The value specified for n must be in the range of 0 to 255. This code
sequence does not affect the amount by which the paper is advanced by subsequent LF
or VT codes.
98 Miscellaneous