Toshiba VM4050 - Manual (Page 99)

Using Speed Dial 2-9
To use one-touch speed dialing:
Ⅵ From standby mode, press and hold the appropriate key for
approximately one second.
Using Speed Dial 10-99
To use two-touch speed dialing:
1. From standby mode, press the first digit key.
2. Press and hold the second digit key for approximately one second.
Changing Speed Dial Locations
To change the speed dial location for a phone number:
1. Press to access the main menu.
2. Highlight Phone Book and press .
3. Highlight Speed Dial #’s and press .
4. Highlight the speed dial entry that you wish to move and select
Options (right softkey).
5. Highlight Move and press .
6. Highlight from the Speed Dial list and press .
Note: You can only move speed dial entries to unused speed dial locations.
Clearing a Speed Dial Entry
To clear a speed dial entry from your Speed Dial list:
1. Press to access the main menu.
2. Highlight Phone Book and press .
3. Highlight Speed Dial #’s and press .
4. Highlight the speed dial entry that you wish to clear and select
Options (right softkey).
5. Highlight Remove and press . (You will be prompted to
confirm.)
6. Highlight Yes and press . (The speed dial entry will be
cleared, but the phone number will still remain in your internal
Phone Book.)
OK
OK
OK
OK
MENU
OK
OK
OK
OK
MENU
Section 2: Understanding Your PCS Phone
2G: Using the Internal Phone Book 88