Toshiba VM4050 - Manual (Page 35)

Dialing From the Internal Phone Book
To dial directly from an internal Phone Book entry:
1. Press to access the main menu.
2. Highlight Phone Book and press .
3. Highlight Find Name and press .
4. Highlight the entry and press .
5. Highlight the phone number and press .
Tip: To dial the first phone number in the entry, press instead of in
step 4 above.
Using One-Touch/Two-Touch Speed Dialing
When this feature is activated, you can dial Speed Dial entries by using
one key press for locations 2-9 or two key presses for locations 10-99.
(See “Setting Speed Dialing” on page 48 and “Assigning a Speed Dial
Location” on page 87.)
To use One-Touch Dialing for Speed Dial locations 2-9:
Ⅵ Press and hold the appropriate key for approximately one second.
The display confirms that the number has been dialed when it
shows “Calling...”.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately one second.
The display confirms that the number has been dialed when it
shows “Calling...”.
Note: Speed dialing is not available when you are roaming with
Call Guard enabled.
OK TALK
TALK
OK
OK
OK
MENU
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 24