Toshiba VM4050 - Manual (Page 165)

Net Guard
When you first connect to the Web, the Net Guard will appear to
confirm that you want to connect. This feature helps you avoid
accidental connections. You can disable the Net Guard in the future
by selecting Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight PCS Vision and press .
4. Highlight Net Guard and press .
5. Highlight On or Off and press .
ⅷ On to activate the Net Guard.
ⅷ Off to deactivate the Net Guard.
Note: When enabled, the Net Guard appears only once per session. The Net
Guard does not appear if the phone is merely re-connecting due to a time-out.
PCS Vision Connection Status and Indicators
Your phone's display lets you know the current status of your
PCS Vision connection through indicators which appear at the top
of the screen. The following symbols are used:
Your PCS Vision connection is active (data is being transferred).
Incoming voice calls go directly to voicemail; outgoing voice
calls can be made, but the PCS Vision connection will terminate.
Your PCS Vision connection is dormant (no data is being sent
or received). Though not currently active, when dormant the
phone can restart an active connection quickly; voice calls can
be made and received.
Your phone is not currently able to access PCS Vision service
features.
If no indicator appears, your phone does not have a current
PCS Vision connection. To launch a connection, see “Launching a
PCS Vision Connection” on page 153.
OK
OK
OK
OK
MENU
Section 3: Using PCS Service Features
3B: PCS Vision 154