Toshiba VM4050 - Manual (Page 72)

Controlling Roaming Charges Using
Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take an additional step before placing or
answering a roaming call. This additional step is not required when
you make or receive calls while on the enhanced Sprint Nationwide
PCS Network.
To turn Call Guard on or off:
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Roaming and press .
4. Highlight Call Guard and press . (A message will appear.)
5. Highlight On or Off and press .
Note: Voice Dialing and Speed Dialing are not available when you are roaming
with Call Guard enabled.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit number
and press . (You can also initiate a call from the internal
Phone Book or Call History.)
2. When the prompt appears, press to proceed.
To answer incoming roaming calls with Call Guard on:
1. Press .
2. When the prompt appears, press to proceed.
Remember if the Call Guard feature is set to On, you need to take extra
steps to make and receive roaming calls even if you have selected the
Analog setting (see page 60).
Tip: See “Prepending a Phone Number From the Internal Phone Book” on page 86
and “Prepending a Phone Number From Call History” on page 73.
1
TALK
1
TALK
OK
OK
OK
OK
MENU
Section 2: Understanding Your PCS Phone
2D: Controlling Your Roaming Experience 61