beautypg.com

One-touch timer recording (otr) – Toshiba D-VR17KB User Manual

Page 32

background image

32

EN

One-touch Timer Recording

(OTR)

This is a simple way to set the recording time in
blocks of 30 minutes. Check that the disc you are
recording onto has enough space remaining for the
time you set.

1

Turn on the unit and insert a
recordable disc.

Make sure that the TV input is set on the unit.

2

Press [DVD].

3

Select the recording mode using
[REC MODE].

(See page 26.)

4

Select the desired channel to record
using [PROG.

/

] or

[the Number buttons].

5

Press [REC

I

] repeatedly until the

desired recording time (30 minutes
to 8 hours) appears on the TV
screen.

One-touch Timer Recording will start.

• When the unit reaches the specified time, it will

be turned off automatically.

• To change the recording length during One-

touch Timer Recording, press [REC

I

]

repeatedly until the desired length appears.

• To cancel One-touch Timer Recording within the

specified time, press [STOP

S].

Hint

• The remaining recording time will appear on the TV

screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.

• The remaining recording time will be displayed on

the front panel display during One-touch Timer
Recording.

• Unlike the timer recording, you can perform the

following operations during One-touch Timer
Recording.
- Turn off the power. (One-touch timer recording will

be cancelled.)

- Use [REC

I

] or [STOP

S] on the remote control.

Note

• You cannot use the pause function during One-

touch Timer Recording.

• The unit will be turned off automatically under the

following conditions.
- No space remains on the disc.
- If a power failure occurs.

• If DVD One-touch Timer Recording is completed

during VCR playback or recording, the DVD will be
in stop mode and the VCR keeps the current mode.

• When One-touch Timer Recording is finished and

the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press
[TIMER SET] to cancel the timer-standby mode to
use the unit continuously.

• If you want to monitor the programme that you are

recording, make sure the device such as a Satellite
Box is powered off or press [DISPLAY] when it is
connected to AV2.

DVD-RW

DVD-RW

Video

DVD-RW

DVD-RW

VR

DVD-R

DVD-R

D

DVD+R

VD+RW

W

DVD+RW

D

DVD+R

VD+R

DVD+R

0:30

8:00

7:30

1:00

Normal

Recording

E9GA0BD_EN.book Page 32 Monday, March 26, 2007 10:14 AM