Tripp Lite NetCommander B072-016-1 - Manual (Page 9)

9 9
Figure 6.6 Settings Window
6. Operation
(continued)
Press [F2] to open the OSD Settings window (Figure 6.6).
With the highlight line on the word GENERAL, press [Enter]. The General Settings window appears
(Figure 6.7).
The Security option in the OSD General Settings menu allows you to activate or deactivate Password
Security. By default, Password Security is set to Off. Only the Administrator will be able to activate/
deactivate Password Security.
To activate/deactivate Password Security:
Highlight the Security option in the OSD General Settings menu 1.
Press [ 2. Space] to change Password Security on/off
Pressing [ 3. Space] will display a prompt requiring you to enter the Security Password. (Security
Password defaults as "Admin")
Once you've typed in the correct password and hit enter, the Password Security status will be changed
4.
Note: Once Password Security is activated, Hotkey commands will be deactivated, leaving you limited to
the OSD menu as your only way to select a port. Once you leave the OSD menu, you will need to
press
[Shift] twice to access the OSD menu and select another port. You will be required to enter
your password each time you enter the OSD menu.
* See page 14 for more information on the NetCommander security features.
Note: If the OSD is password protected, only the Administrator will be able to access the OSD Settings
window by using the appropriate password.
6.6 OSD Settings (F2)
6.7 General Settings
Figure 6.7 General Settings Window
6.7.1 Security